1. This machine tool adopts belt drive, low noise, and is suitable for drilling, expanding, reaming and milling on various commonly used materials.
2. This machine has 12 levels of variable speed, a wide range of speed, suitable for the processing of various commonly used soft and hard materials;
3. The headstock and workbench can be lifted and lowered, and can also rotate around the column, which expands the processing range;
4. The fuselage is stable and sturdy, and the size of the workbench is 585×190mm;
5. This machine tool can be equipped with multi-axis device for multi-hole simultaneous drilling, expansion, reaming and tapping according to user needs.
6. The machine can realize vertical and horizontal milling two kinds of processing functions, and the vertical spindle sleeve has two kinds of feeds: manual and micro-motion;
7. The machine tool X, Y, Z three-way guide rail pair ultrasonic quenching after grinding;
8. The machine tool worktable X Y, Z three-way motorized feed.
9. It can realize two processing functions of vertical and horizontal milling.
10. The vertical spindle sleeve has two kinds of feeds: manual and fretting.
11. Grinding after quenching of the worktable guide rail.
12. The workbench is divided into three motorized feed modes: type A is three-way, type C is one-way, and type D is two-way.
There is a variable speed handle on the head of the drilling and milling machine, some of the drilling and milling machine model is ZX6350C, and the handle on the head of the drilling and milling machine is 2, and we also have the common ZX6332 drilling and milling machine handle, some are two, some are three, and the handle of the ZX9124 drilling and milling machine is three, so is there any difference in the handle?
The handle of the drilling and milling machine is mainly used to adjust the speed of the drilling and milling machine, the head of the drilling and milling machine, and the speed of the use of the drilling and milling machine, which is not any gap, so some manufacturers of the handle of the drilling and milling machine as an advantage are not advantages, and the most common thing on the market today is the customer reflection of the two handles, or the drilling and milling machine with two handles is of good quality and high precision.