Model B5032/ B5040 slotting machine is used for slotting flat and formed surfaces, grooves and keyway. Slotting Machine is suitable for either single-piece or small serial production. The machine is mainly composed of column, ram, table, feed box, speed gearbox and electrical equipment, etc.

Specification Parameter

Specification	Unit	B5032	B5040
Max. slotting length	mm	320	400
Max. dimension of workpiece (L*W)	mm	600*320	620*320
Max. weight of workpiece	kg	500
Max. cutting force	N	7500
Number of ram reciprocation (per minute)		20.32.50.80
Vertical adjusting distance of ram	mm	315
Inclination angle of ram		0-8°
Distance from cutter head surface to facade of machine bed	mm	600
Slotting cutter size(W*H)	mm	25*40
Worktable diameter	mm	630
Distance from worktable surface to Lower end of sliding rack	mm	490	510
Max. Longitudinal travel of worktable (auto/manual)	mm	480/620
Cross traverse of worktable(auto/manual)	mm	480/560
Feed range of worktable in longitudinal and cross direction	mm	0.08-1.21
Rotary feed range of worktable	deg.	0.052-0.783
Main motor power	KW	4
Main motor rotation speed	rpm	960
Rapid traverse motor power	KW	0.75(D)
Rapid traverse motor speed	rpm	910(D)
Weight of machine	kg	3500	3640
Overall dimension(LWH)	mm	229015252285	229015252485

Specification	Unit	B50100	B50125
Max. slotting length	mm	1000	1250
Slotting speed	m/min	4-25	4-30
Return speed	m/min	7-25	7-35
Worktable diameter	mm	1250	1400
Max. weight of workpiece	kg	4000	4500
Max. longitudinal travel of worktable(auto/manual)	mm	1200	1400
Cross traverse of worktable(auto/manual)	mm	1000	1120
Rapid travel of working table longitudinal/cross	mm/min	500
Distance from worktable surface to lower end of sliding rack	mm	1140	1650
Distance from cutter head surface to facade of machine bed	mm	1120	1600
Feed range of worktable in longitudinal and cross direction (ram move back and forth per time)	mm	0.2-5	0.2-3
Rotary feed range of worktable(ram moves back and forth per time)	mm	0.4-10	0.1-5
Max. cutting force(speed 10-20m/min)	N	24500
Main motor power	kw	30	37
Weight of machine	kg	22	26
Overall dimension(LWH)	mm	229015252285	229015252485

Product Feature

Usage

This vertical slotting machine is used to process the plane, profile and groove of various workpieces, and is suitable for single-piece small batch production. The machine tool is composed of main parts such as bed, ram, worktable, feed box, and electrical. The bed is composed of an upper and a lower part. The front of the upper bed is equipped with a ram, a sliding frame and a rocking handle mechanism, and a partition is cast at the bottom as a lubricating oil pool. Oil is delivered to rams, guide rails, etc. through gear pumps, oil separators, etc., and oil can be filled by opening the back cover of the bed. Refer to the front oil level for the oil level. There is a dovetail guide rail at the top of the lower bed for longitudinal movement of the worktable. A motor is installed inside the rear, and a feed box is installed on the right side of the rear. The ram rocker mechanism is a mechanism that changes the rotary motion of the rocker gear into the reciprocating linear motion of the ram. According to the height of the workpiece, the ram can be adjusted within 315 mm. Refer to the control system diagram when adjusting. You can first loosen the nut in front of the front ram, and then twist the bevel gear with hexagonal head to get the verticality position of the ram. Tighten the nut when the requirements are met. When the ram is returning to the stroke, the insert tool can rotate with the tool chuck around the taper pin at the lower right to protect the cutting edge of the tool. The hand wheel on the gearbox can be turned by hand to obtain the vertical movement of the ram. The worktable can realize three different movements, and can obtain longitudinal, lateral or rotary motorized feeds respectively. The start and stop of the machine tool are realized by the button installed on the front end of the lower bed and the handle on the right side of the gearbox.

Brief description

This vertical slotting machine is used for slotting flat and formed surfaces, grooves and keyway. It is suitable for either single-piece or small serial production. The machine is mainly composed of column, ram, table, feed box, speed gearbox and electrical equipment, etc.

The column is composed of two parts, i.e. the upper part, which is formed the main column; and the lower one, which is formed the column base.

Ram slide and crank mechanism are mounted in the upper part of the column. A separator castled in the lower part of the column is to form an oil reservoir from which oil is delivered by a plunger pump through an oil distributor to the ram guide, etc. For filling the oil, just open the rear cover of the column. The oil level is observed form an oil gauge in the front of the column. The front top of the column base is provided with dovetail guides for longitudinal movement of the table. The electric motor is mounted in the rear interior, while the feed box is mounted on the rear right side of the column base.

The ram and the crank-mechanism of vertical slotting machine are used for converting the rotating motion of the crankshaft into reciprocating motion of the ram .According to different heights of work, the ram can be adjusted in the range of 0-400mm.For adjusting the ram, first loosen the clamping nut fitted in the front of the ram, then turn the bevel gear which has an hexagon hole, the vertical adjustment of the ram can then be carried out. When the adjustment is completed, be sure to tighten the nut again. During the return stroke of the ram, the tool block can swing round the hinge pin fitted on the lower right side of tool block to protect the cutting edge of the slotting tool from damage. The hand wheel mounted on the speed gearbox is provided for manual vertical movement of the ram.