Knowledge

How to adjust gap between vertical movement ram nut of vertical tool post for vertical lathe? The gap of the thread of the ram of the vertical tool po

How to adjust square tool post of vertical lathe When square tool post is working, handle "A" should be in the position "Ⅰ". When rotating the square

How to adjust for pentagonal turret of vertical lathe? Handle "A" of vertical lathe should be carried to the upward position when cutter is working. W

The purpose of adjusting the spindle bearing is to reduce the radial clearance of the bearing. Since the spindle journal and the bearing inner ring ha

Foundation explanation: Firmness of foundation effects directly basic accuracy of machine tool, so the foundation should meet below requirements: 3.1

This series of machine tools is a program-controlled single-column vertical lathe. Controlled by domestic servo system. Tool post movement is with two

C5112 vertical lathe is single-column vertical lathe controlled by domestic servo.

The hydraulic system of this vertical lathe is used for worktable speed-changing, beam relaxation and clamping, worktable guide rail pressure lubricat

This series of vertical lathe machine is a program-controlled single-column vertical lathe. Vertical lathe machine is controlled by domestic servo sys

Single-column vertical lathe controlled by domestic servo. The vertical turning tool post of vertical lathe machine is a manual pentagonal turret type

Feeding box owns the electromagnetic valve of the clutch, so the button can achieve the fast move and direction selection. Feed box is equipped with d