Model C5112/C5116/C5120, C5123/C5126 single column vertical machine is suitable for high-speed steel cutter, carbide cutter and all kinds of high performance cutter, which can make rough and finish turning for inside and outside cylindrical, conical, end face, grooving and etc.

Specification Parameter

Specification		Unit	C5112	C5116	C5120	C5123	C5126
Max.cutting diameter of vertical tool post		mm	1250	1600	2000	2300	2600
Max.cutting height		mm	1000	1000/1400	1250	1350	1600
Work table	diameter	mm	1000	1400	1800	2000	2250
	max. loading	t	3.2	5	8	8	10
	speed range	rpm	6.3-200	5-160	3.2-100	3.2-100	2-63
	step range	step	16	16	16	16	16
	max. torque	kn. m	17.5	25	25	25	35
Vertical tool post	feeding rang	mm/min	0.8-86	0.8-86	0.8-86	0.8-86	0.8-86
	feed steps	step	12	12	12	12	12
	cutting force	kn	20	25	25	25	25
	vertical travel	mm	650	800/1000	800/1000	800/1000	1000
	horizontal travel	mm	700	915	1200	1300	1500
	swing angle	°	±30	±30	±30	±30	±30
Side tool post	feed range	mm/min	0.8-86	0.8-86	0.8-86	0.8-86	0.8-86
	cutting force	kn	20	20	20	20	20
	vertical travel	mm	900	900	900	900	900
	horizontal travel	mm	630	630	630	630	630
Vertical (side) turret rapid travel speed		m/min	1.8	1.8	1.55	1.55	1.55
Cross beam travel		mm	650	650/1050	850	1050	1250
Tool bar section size		mm	30*40	30*40	40*40	40*40	40*40
Feed motor power		kw	1.3/1.8	1.3/1.8	1.3/1.8	1.3/1.8	1.3/1.8
Main motor		kw	22	30	30	30	37
Machine weight		t	8.5	12.4/14.8	17	18	26/28
Overall dimension(LWH)		mm	23602280 2800	28302670 3010	32002800 3250	32102850 3300	33004000 3500

Installation method

Place the adjusting wedge near the foot screw of vertical machine, put the machine tool on the adjusting wedge, adjust well the perpendicularity for the installation level and vertical column guide way of machine tool. (Put the level instrument on the flat ruler and lean against the vertical column guide way separately, take Max. the algebraic difference of them).

Pouring the concrete in the foundation hole after adjusting vertical machine well. After the concrete is hardened, fasten the foot screw of vertical machine, and check basic precision of machine tool again, connect the electric circle as per the electric connecting drawing, and check that the rotation direction of main motor should be in conformity with the arrow in the belt cover. Check whether the movement direction for the rapid feed and beam lifting is correct, then check comprehensively the precision of machine tool as per certificate of accuracy of this machine tool.

Operation method

Start the oil pump firstly before actuating the vertical machine

1. Speed-changing of working table can be performed only when working table has stopped. Firstly push the button "main spindle stops" on the button station when changing the speed, then rotate the pre-selection speed switch to the required revolution, press button "main spindle speed-changing", the main spindle motor servo automatically, at this time high pressure oil pushes the shifting yoke, press "main spindle forward rotation" button after the signal lamp is bright, working table achieve the required rotation speed.

2. Exchanging feeding amount of side tool post can be operated as per the feeding amount label on the feeding box, firstly select low gear (I) or high gear (II) of the feeding motor (feeding motor is double-speed motor). Turn side tool post or vertical tool post to the indicated position according to the handle change label. Then select the desired feed direction with the "cross switch" of the vertical or side tool holder on the hanging button stand, and then press the "feed" button of the vertical and side tool post to get the required feed amount. The conversion of feed can be carried out when the worktable rotates or stops. But there is feed only after the worktable rotates.

3. Rapid inching or rapid moving of vertical & side tool post, firstly use the "cross-switch" to choose direction, tool post can achieve inching when inching rapid button of vertical or side tool post. Tool post can achieve rapid moving if pressing the rapid button, rapid-speed moving stops when loosening this button.

4. When a curved surface needs to be machined manually by vertical tool post, just carry it into handle (18) or (19), then curved surface can be done manually.

5. When crossbeam rises and falls, should move the vertical tool post to the position of the lifting screw rod, press down the button of crossbeam "up" or "down", so that the crossbeam can rise and fall. Crossbeam stops when loosening the button. Crossbeam rises again for a distance after fall.