Model SAH4030/ SAH4042/ SAH4050/ TK350/ TK500/ TK1000 slant bed cnc lathe is suitable for machining of shaft and disc type parts.

Specification Parameter

Specification	Unit	SAH4030	SAH4042	SAH4050
The tilt angle		45°	45°	45°
Swing over bed diameter	mm	400	400	400
Max. swing over slide	mm	120	120	220
Rail width	mm	286	403	363
Z axis max. travel	mm	400	420	500
X axis max. travel	mm	350	460	220
Spindle end		A2-5	A2-5	A2-6
Taper of spindle hole		Morse 6	45	Morse 6
Spindle through hole diameter	mm	56	49	62
Spindle speed	r/min	100-5000	100-5000	100-4500
The tailstock		No	No	Hydraulic pressure
Tool post		Gang type	Gang type	8 station servo turret
Servo main motor	kw	5.5	5.5	7.5
Dimension	mm	208015401515	214016001680	256016601800
Weight	kg	1500	1800	2000

Specification	Unit	TK350	TK500	TK1000
Swing over bed	mm	Φ420	Φ560	Φ560
Max.processing length	mm	350	500	1000
Standard turning diameter	mm	280	280	280
Max. turning diameter	mm	300	400	400
Swing over cross slide	mm	285	350	350
Spindle nose		A2-6	A2-6/A2-8	A2-6/A2-8
Spindle bore dia.	mm	65	65/80	65/80
Max. bar capacity	mm	50	50/66	50/66
Spindle speed	rpm	50-4500	50-4500/4000	50-4500/4000
Spindle motor (continuous/15min.	kw	7.5/11	11/15	11/15
Spindle output max. Torque	N.m	117	235	235
Chuck size	Inch	8	8	8
X/Z axis rapid traverse	m/min	30	30	30
X/Z axis travel	mm	175/410	210/560	210/1050
X/Z axis motor power	kw	1.8	1.8	1.8
Tailstock body travel	mm	-300	450	900
Tailstock hole taper		(MT4#)	MT5#	MT5#
Tailstock center structure		(Live center)	Live center	Live center
Turret type		Servo 8 station turret	Servo 8 station turret	Servo 8 station turret
Tool size	mm	25*25/Φ40	25*25/Φ40	25*25/Φ40
Processing precision		IT6	IT6	IT6
X/Z axis positioning accuracy	mm	0.008	0.008	0.008
X/Z axis repeatability	mm	0.004	0.004	0.004
Machine weight	kg	3300	4000	4800
Machine dimension	mm	198015851750	275018601850	357018601850

Product Feature

Machines with pleasing appearance, reasonable structure design, convenient operation, whole casting molding machine tool, stable structure, good rigidity, high precision, the characteristics of spindle unit adopts the factory research and development of servo electrical axis, with high speed and high torque at low speed, the characteristics of stable performance, X travel is big, can install more gang type tool, power heads or turret to realize complex turning and milling.

Foundation instructions

Firmness of foundation effects directly basic accuracy of machine tool, so the foundation should meet below requirements:

a) In order to eliminate vibration during operation, the foundation shall be hard soil without subsidence or distortion, and shall be protective against penetration of groundwater.

b) The foundation shall have no crack, and shall have adequate firmness.

c) The foundation shall be constructed according to the foundation drawings, depth of foundation shall be determined by local soil condition.